International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > Fuel Injection

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-01-2019, 02:08 PM
DattMtn's Avatar
DattMtn DattMtn is offline
230 Tornado
 
Join Date: Oct 24, 2017
Location: Boulder CO
Posts: 9
Holley sniper w/ headers troubleshoot

Hey all, have had a Holley sniper EFI system installed for about a year now on my 258 and it was running pretty good. My cast headers cracked and I replaced it with Hedman Headers (I do not suggest these headers, they do not clear the engine mounts). At the same time I upgraded to the 2bbl BBD cast intake as my motor came with the 1bbl. After some headaches, bashing, and grinding, I got both headers installed and now the engine is running like trash. I have reset the Holley Sniper to relearn the base fuel map etc etc and still need to drive it a bit to let that dialed in. It idles fine, actually better than it's ever idled, but my major complaint is that it runs the best on about 10-20% throttle, anything more and it stutters/spits or just falls on its face and doesn't have any power. If I hold it on 10-20% throttle it will accelerate way harder than WOT. I have tried to scope out a vacuum leak by spraying down suspect areas with starter fluid and haven't found anywhere it revs up due to pulling in air. Right now I am running the factory air cleaner (long snout style) but will be replacing it with a round type, replacing valve cover breathers and PCV's etc.

My leading suspects are exhaust/intake leaks, it's always an issue with what you just worked on right? But what are other ways to find either? I have a mechanical fan on the front and I am considering pulling the belt so I have still air to feel for puffs (running it for very short times).
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Holley Sniper install keeping the stock fuel system acct21 Fuel Injection 24 10-03-2021 06:32 AM
Re: Holley Sniper EFI GWNashville Fuel Injection 3 11-29-2020 07:19 PM
Holley sniper EFI 727 kickdown J10 Bob Fuel Injection 9 07-06-2019 06:51 PM
Holley sniper with emissions COJEEPBOY General FSJ Tech 5 01-09-2019 09:31 AM
Holley Sniper hyperspark Ignition System posulli88 Fuel Injection 8 07-10-2018 06:54 PM


All times are GMT -6. The time now is 07:21 PM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
corner corner