International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Tech

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-09-2009, 11:40 AM
jlewis's Avatar
jlewis jlewis is offline
Gear Head
 
Join Date: Jun 12, 2005
Location: culpeper, va
Posts: 556
Question about a coolant leak

I just got done looking under my jeep for a transmission leak and I noticed a green on my engine. The leak is coming from behind my headers on my engine. Where do you think that leak is coming from? I could please use your help right now. Thanks.
Reply With Quote
  #2  
Old 06-09-2009, 11:44 AM
PlasticBoob's Avatar
PlasticBoob PlasticBoob is offline
Fool-Injected
 
Join Date: Jun 30, 2003
Location: The Long Beach area, SoCal
Posts: 3,501
Sounds like a freeze plug to me.
__________________
Rob
1974 Cherokee S, fuel injected 401, Trans-am Red, Aussie locker 'out back'
Click here for video!
Current Jeep Status: Running!
Southern California FSJ forum - Junkyard reports section added!
///M
Because real cars don't just drive 1/4 mile at a time
Reply With Quote
  #3  
Old 06-09-2009, 02:11 PM
jlewis's Avatar
jlewis jlewis is offline
Gear Head
 
Join Date: Jun 12, 2005
Location: culpeper, va
Posts: 556
Is that hard to fix?
Reply With Quote
  #4  
Old 06-09-2009, 04:51 PM
BarryL's Avatar
BarryL BarryL is offline
Gear Head
 
Join Date: Aug 29, 2007
Location: Charlotte, NC
Posts: 721
Depends upon which freeze plug is leaking. Changing is easy. Getting to some of the back ones is darn near impossible with the engine in place. There may be some trick I don't know about.
__________________
'84 Wag, 360, 727, 229, stock 177k
Reply With Quote
  #5  
Old 06-09-2009, 06:11 PM
jlewis's Avatar
jlewis jlewis is offline
Gear Head
 
Join Date: Jun 12, 2005
Location: culpeper, va
Posts: 556
I also have another question. Since I busted my radiator this past weekend. It has been reading hot. I have replaced the radiator and temperature sending unit. What else might be the problem for it running hot? How can you tell if you are getting proper coolant flow?
Reply With Quote
  #6  
Old 06-09-2009, 06:20 PM
J10_Jimbo's Avatar
J10_Jimbo J10_Jimbo is offline
Gear Head
 
Join Date: Nov 23, 2004
Location: Blanchard, LA
Posts: 617
Most freeze plugs on the side of an engine can be done in place, there is a rubber plug that tightens in place that will last for a while, or get the steel replacements that hammer into place. Depends on location as to whether you will need to remove your exhaust manifold.

Hot engine san be caused by failing water pump, slipping fan clutch, stuck thermastat, and of course water leaking from a rusted freeze plug.
Reply With Quote
  #7  
Old 06-09-2009, 06:28 PM
Chevelleguy's Avatar
Chevelleguy Chevelleguy is offline
 
Join Date: Jul 20, 2003
Location: Forney,TX
Posts: 5,465
If it overheated with the first radiator, you need to replace the thermostat. They don't like it and will leak the wax out of the temp bulb which causes them to not open again after cooling down.
__________________
David "If all else fails, read the instructions."
83 Wag Lt,BJ's 6"lift,360/727/Pinned229,D44/trac-lok,AMC20/lock-right,35/12.50 Baja MTZ,Pro-Jection EFI.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:34 AM.


Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
corner corner