TFI Coil Mounting locations - What are other doing?

[KdkGrizz]

Hey everyone. So a few ears ago I swapped over to the complete MSD ignition on my 82 Waggy. Previously I was able to fabricate a bracket that I attached to the top of the A/C compressor. Pretty solid location and close to the distributor. Well I just recently updated the HVAC to the Classic Auto Air system which comes with a new compressor, etc. I was never totally comfortable with coil on the compressor to being with.

So I was wondering what are other people are there doing?

Grizz...

[kansasboy001]

I juat got 2 pieces of flat steel stock and mounted the tfi coil vertically on the stock bracket.

[Mr Carts]

I mounted the Coil on fender by the cruise control.

[JeepJeepster]

I cut up the stock mount and mounted it to the drivers side fender. It seemed to work great.

[acct21]

Got a great OEM mount off a Fox body Mustang. Sits up on the fender well next to the cruise servo.

[JeepJeepster]

Found an old pic

[Brynjminjones]

I'll see if I can find a picture as I've since removed it, but I used the bracket linked below and got it to fit perfectly in the stock location by the air cleaner.

https://www.americanmuscle.com/ignition-coil-bracket-8693.html

EDIT:
I've found a picture, here it is:

https://photos.app.goo.gl/qA1acDDLGXdei7W78

[KdkGrizz]

I'll see if I can find a picture as I've since removed it, but I used the bracket linked below and got it to fit perfectly in the stock location by the air cleaner.

https://www.americanmuscle.com/ignition-coil-bracket-8693.html

EDIT:
I've found a picture, here it is:
https://photos.app.goo.gl/qA1acDDLGXdei7W78

Very cool I like it. What mods did you have to do to the bracket. I actually have a couple of those from the junk yard laying around...