Ride height with factory springs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • zseese
    232 I6
    • Apr 10, 2010
    • 25

    Ride height with factory springs

    what is it? Actually measured on one of yalls vehicles that is not modified, I need the number to compare to mine to figure out how much my suspension is sagging, I'm running 235/75/15 so someone with comparable tires and new factory height springs please...
    86 Grand Wagoneer
    360 AMC V8
    No lift or cutting, yet...
  • Lindel
    Perfesser of Jeepology
    • Jun 15, 2000
    • 9205

    #2
    typical wag-sag is around 1 to 3 inches. Your stock ride height should be around the 16" mark, measured at the door sill. It'll be sagging more at the driver side rear than anywhere else.
    Jeep Grounds
    RRV Homepage
    Texas Full Size Jeep Association
    1987 Grand Wagoneer
    AMC 360/TF727/NP229
    1999 Wrangler Sport
    4.0L/AX-15/NV231


    ?Freedom is never more than one generation away from extinction? by Ronald Reagan.


    Formerly of DFW/Gun Barrel City, TX - eventually to return...

    Comment

    • zseese
      232 I6
      • Apr 10, 2010
      • 25

      #3
      Originally posted by Lindel
      typical wag-sag is around 1 to 3 inches. Your stock ride height should be around the 16" mark, measured at the door sill. It'll be sagging more at the driver side rear than anywhere else.
      Well I have 16" in back passenger side and 14" front same side, have a flat on drivers side front so I think I am probably around 14.5"-15" all around on 4 aired up tires...not too shabby, thanks for the response
      86 Grand Wagoneer
      360 AMC V8
      No lift or cutting, yet...

      Comment

      • billyrb
        BJ's Off-Road
        • Aug 15, 2001
        • 10032

        #4
        66.4" at top rear of roof with stock springs and stock tires.
        BJ's Off-Road
        [email protected]
        Your source for '63-'91 FSJ Parts

        Comment

        Working...
        X