View Single Post
  #10  
Old 09-18-2018, 07:57 AM
jblue1555 jblue1555 is offline
230 Tornado
 
Join Date: Feb 27, 2014
Location: kansas
Posts: 4
I installed Fitech 600 hp unit on a CJ -7 using their 2 inch in tank fuel pump. It was in stock 20 gal plastic tank. Ran new 3/8 feed and return lines, only had to remove stock sender to do the install. They also have a in tank pump that has a Reg. built in it and can be set to return the fuel in the tank and negating the need for a return line. Make sure to locate pump for fuel line routing, clearance of cross members, and fuel sock will not affect stock fuel sender when you reinstall it.
Reply With Quote