View Single Post
Old 09-12-2019, 03:26 PM
rang-a-stang's Avatar
rang-a-stang rang-a-stang is offline
Join Date: Oct 31, 2016
Location: Camarillo, CA
Posts: 3,620
Originally Posted by babywag
What is your FP set @
Did you change the injector flow rate in .bin to match your injectors @ that FP?
If the value isn't correct the pcm calculations for fuel will be wrong.

It appears to be rich, but without seeing the logs or the fuel trims just a guess.
You might want to look @ INT & BLM in monitor to see what's occurring ~backfiring?

Before significant changes to fuel map as I suggested a couple times already force it OL and see how it runs.
Fuel pressure is at 12psi.

Yep, bin is set to same flow as injectors.

I look at BLM and INT while I am driving and did look at them in the history graphs. They are better for the 401 bin than the 454 bin but I don
79 Cherokee Chief (passed CA smog check Sept 2020)
(Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring
Reply With Quote