Thread: Body Lifts
View Single Post
  #7  
Old 08-11-2000, 03:28 PM
DLyons
 
Posts: n/a
Exclamation

The only problem I encountered was having two of the nuts that are tack welded in the body break loose. I had to pry open the metal around the nut and reweld it to the body.
I also had to lengthen the shifter linkage a couple inches (cut the head off a bolt of the same diameter and welded it in place).
The small clamps that hold the E-brake cables had to be unbolted from the frame on each side. The whole installation went better than expected but plan on about half a day.

------------------
DLyons
84 Grand Wagoneer
360 (For now!)
2" Suspension Lift
2 1/2" Body Lift
Rattle Can Paintjob
Reply With Quote