Originally posted by CJ the noisemaker
Badge/sticker idea
Collapse
X
-
Man rough crowd today
I like the out of round wheels1990 Grand Wagoneer.. black with sand interior..
Razor grille, Hella H4 headlights, Piaa driving, LED spider taillights, tinted windows.
Full Corinthian leather front and rear seats, custom full length center console with cup holders. 100 sf of Rattle Trap on floor.
Edelbrock intake and 2132 cam, Howell TBI, Ford Distributor Cap, TFI Ignition Coil, Desmogged
Comment
-
-
It's Perfect, As is...
do it exactly as it is above. exactly,blue notebook lines,everything.-RistowLast edited by WarWagon52; 01-07-2012, 08:05 AM.
Comment
-
-
Like this?
Great idea CJ! Just happened to have Illustrator & Photoshop open so I worked up a design based on your sketch. I traced the waggy outline from the cover of the 84 TSM, but it looks to have wt flares. Needs more work but a decent start. I also have a printing co but don't mess with vinyl cutting but if someone does, I'll be happy to provide files.
http://s1219.photobucket.com/albums/dd432/outragegis/IFSJA%20Vinyl%20Cut/?action=view¤t=IFSJAvinylcut.jpg79 Cherokee, 360, QT, Stocky
At Large Board Member, Central South-East Jurisdiction, Elijah Craig Chapter, Bluegrass Division, FSJ Prissy Restoration Association
Comment
-
-
Add an oil spot under it and I'm in.N4ZYV
I ain't giving up. I've worked hard, it took me years to work my way to the bottom.
1998 Cherokee Sport (not maroon! Have history with maroon XJs)
1937 Chevy pickup (in progress)
1966 Mustang
1937 IH D2
Comment
-
-
-
Originally posted by RandeAdd an oil spot under it and I'm in.'87 GW w/ 3" lift, Flowmaster Exhaust, 32x11.50 BFG A/T's (yup I got-r-dun), swapped out the motor with the 360 I rebuilt in my '89 (R.I.P Old Blue). Check out my link for pics and more infohttp://thejollyrogerwag.webs.com/
Comment
-
-
3 versions
Originally posted by OutrageGISGreat idea CJ! Just happened to have Illustrator & Photoshop open so I worked up a design based on your sketch. I traced the waggy outline from the cover of the 84 TSM, but it looks to have wt flares. Needs more work but a decent start. I also have a printing co but don't mess with vinyl cutting but if someone does, I'll be happy to provide files.
http://s1219.photobucket.com/albums/dd432/outragegis/IFSJA%20Vinyl%20Cut/?action=view¤t=IFSJAvinylcut.jpg79 Cherokee, 360, QT, Stocky
At Large Board Member, Central South-East Jurisdiction, Elijah Craig Chapter, Bluegrass Division, FSJ Prissy Restoration Association
Comment
-
-
yes but I have a ?
Originally posted by CJ the noisemakerSo I have an idea for an ifsja badge and drew it up. I'm thinking of making it into a sticker if there was enough interest.
So what do you think?
Count me in...91 Grand Wagoneer "Final Edition"
DeWooded
6 inch Hellcreek lift.
Rhino Grill
BFGoodrich MT T/A KM2 33X10.5. R15
Offenhauser Dual Port 360 Intake
Holley 600cfm
If are not living on the Edge you are taking up to much room.
########## '''''''''''''''''''''''''''''''''
http://www.cardomain.com/ride/3172261
Comment
-
-
I am in let me know when you have them and I will take a few. if you do different jeeps in the midle I would take one of each for sure.
if you need the done up let me know as I deal with a guy here that makes stickers and does them up realy cheep for me. the more you get made the cheeper they are on price.JEEP Why did they make so many??? I just don't have the time to buy them all...LOL
Comment
-
-
I think it's great just like it is!2000 Infinity QX4, 3.3L, MPFI, 4 speed auto, 2 speed Nissan tcase, Unibody, IFS front, 4 link rear solid axle with 255-70/16s
IFSJA WMS PROJECT
EARLY WAG LIFT SEARCH
...Pay no attention to these heathen barbarians with their cutting torches and 8" lift kits!...
Comment
-
Comment