View Single Post
  #3  
Old 10-13-2011, 04:04 PM
hummer010's Avatar
hummer010 hummer010 is offline
Member
 
Join Date: Jul 26, 2007
Location: The Great White North
Posts: 192
Quote:
Originally Posted by csuengr
If you don't need the clearance, whack it off. But before you do, tack weld some braces on top and the bottom. It is almost certain that the frame will want to change dimensions if you just cut it without any bracing. Weld in your new piece, remove the braces.

That's really good advice.
__________________
68 j3000 327/T18/D20 Work in Progress
Reply With Quote