subbin Up
corbeau moab seats
Collapse
X
-
-
No problem.. Since then I have added the safety harnesses and a tuffy console.82 Cherokee WT ? SFwith Alcan/agr box/Borgeson shaft/ 401/performer/Holley TA/HEI/BeCool/727/ALTAS(2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave,Discs, ARB,Artec Truss)/MTR 37/Corbeau Moab Seats /Hella/tuffy console/sliders/custombumpers&roll bar/WARN 8000/steering brace/CO2 Tank/dual batts/custom TCskid plate
Comment
-
-
Can I get a couple measurements? I don't have a tilt steering column, and I'm a big guy.
The first spot is the high corner of the seat where you get in at to the floor and the second is from the front to the floor pan. I want to compare them to my stockers to see if they are higher or (hopefully) lower.
Thanks!Last edited by Atla; 09-05-2012, 04:47 PM.
Comment
-
-
Originally posted by will eNo problem.. Since then I have added the safety harnesses and a tuffy console.
Just curious how you mounted the tuffy box and looking ideas to elevate it an inch or so -
Bob79 Cherokee S
Comment
-
-
Originally posted by AtlaCan I get a couple measurements? I don't have a tilt steering column, and I'm a big guy.
The first spot is the high corner of the seat where you get in at to the floor and the second is from the front to the floor pan. I want to compare them to my stockers to see if they are higher or (hopefully) lower.
Thanks!
Tuffy is mounted right to the floor.82 Cherokee WT ? SFwith Alcan/agr box/Borgeson shaft/ 401/performer/Holley TA/HEI/BeCool/727/ALTAS(2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave,Discs, ARB,Artec Truss)/MTR 37/Corbeau Moab Seats /Hella/tuffy console/sliders/custombumpers&roll bar/WARN 8000/steering brace/CO2 Tank/dual batts/custom TCskid plate
Comment
-
Comment