Coolant leak timing cover

[Mike7009]

Just noticed this. Looks to have some kind of patch near the distributor. It looks to have a newer water pump so Maybe cracked it while changing that? What's the best way to go about this? Find a good used one? I seen bjs has one for $245 but I'm fine with used also. Is this hard to do? And if theirs a "how to" posted somwhere that I didn't see I'd appreciate a link to it.. thanks.
Here's the link..

http://vid295.photobucket.com/albums/mm132/pamike/Mobile%20Uploads/20160528_134140_zps121gwbgy.mp4

[wiley-moeracing]

get a good used one or buy newer quality one, i have found some covers that were corroded and leaking out of the casting, check your local junck yards or craigs list, ect. not hard to change out just will take you and afternoon,.

[wiley-moeracing]

get a good used one or buy newer quality one, i have found some covers that were corroded and leaking out of the casting, check your local junck yards or craigs list, ect. not hard to change out just will take you and afternoon, might as well change the timing chain while you are in there also.

[Mike7009]

Any idea of what ones are quality? Was leaning tward maybe the one bjs has. Just curious incase I can't find a good used one.

[Ristow]

i have a bunch of timing covers.

[Mike7009]

Pm me with the info. How much you want for one etc.. definitely need one

[Mike7009]

Ristow, I sent you a couple PM's and havnt heard back. Just wanted to make sure you got them. Let me know

[Ristow]

I'll be home tonite my friend. Shoot me your address in full so I don't have to go to po twice.

[Mike7009]

Ok. Just wanted to make sure the PM's were working. I'll be sending another pm shortly

Edit: PM sent