View Single Post
Old 02-09-2020, 06:54 PM
MrN2OBelvedere MrN2OBelvedere is offline
232 I6
Join Date: Sep 26, 2015
Location: Georgia
Posts: 30
Originally Posted by maybeadinosaur
I don't recall - I got down to where the wires slide on their tiny little posts and I cleaned those to a degree. But it sounds like I need to do it again.

Yeah, that's not far enough. You have to completely pull the switch internal mechanicals apart. There's little prongs that are bent in keeping it all together. You pry these back and the halves of the switch will come apart. I almost guarantee you will find this switch all gunked up. I certainly did. Clean up all the contacts and switches in all four doors.
Reply With Quote