Headlight Relay Harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • tomd
    304 AMC
    • May 04, 2002
    • 1826

    #16
    And i ordered up http://www.ebay.com/itm/300792076687...84.m1497.l2649 We'll see how i like 'em, if i don't, i'll save 'em for another project. Obviously the blue bulb is going away.
    71 J-4000 on a 76 Cherokee chassis with homemade flatbed
    360/Th400/PT QT/3.07 D44s

    Comment

    • serehill
      Gone,Never Forgotten.
      • Nov 22, 2009
      • 8619

      #17
      you will

      Originally posted by tomd
      And i ordered up http://www.ebay.com/itm/300792076687...84.m1497.l2649 We'll see how i like 'em, if i don't, i'll save 'em for another project. Obviously the blue bulb is going away.
      Just throw the blue mini bulbs away. same housings I have with HIDs

      80 Cherokee
      360 ci 727 with
      Comp cams 270 h
      NP208
      Edlebrock performer intake
      Holley 4180
      Msd total multi spark.
      4" rusty's springs
      Member, FSJ Prissy Restoration Association

      If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.

      Comment

      • tomd
        304 AMC
        • May 04, 2002
        • 1826

        #18
        Serehill, are those stone guards on them? Where did you get them if so?
        71 J-4000 on a 76 Cherokee chassis with homemade flatbed
        360/Th400/PT QT/3.07 D44s

        Comment

        • joe
          • Apr 28, 2000
          • 22392

          #19
          Originally posted by tomd
          I have ordered up some H4 housings and bulbs too, excited to see the difference between setups
          With H4's if you go higher than stock wattage I'd recommend also swapping the plastic plug for a ceramic one. Avail where ever to buy the lamps.
          joe
          "Don't mind me. I'm just here for the alibi"

          Comment

          • tomd
            304 AMC
            • May 04, 2002
            • 1826

            #20
            Originally posted by joe
            With H4's if you go higher than stock wattage I'd recommend also swapping the plastic plug for a ceramic one. Avail where ever to buy the lamps.
            Yep, if you look in there they are ceramic plugs with orange boots on them.
            71 J-4000 on a 76 Cherokee chassis with homemade flatbed
            360/Th400/PT QT/3.07 D44s

            Comment

            • serehill
              Gone,Never Forgotten.
              • Nov 22, 2009
              • 8619

              #21
              Yes they are

              Originally posted by tomd
              Serehill, are those stone guards on them? Where did you get them if so?

              I can not tell you why but these things are rediculous in cost if you look araund. It took a log time to find this cost. But I'll share LOL. @ sets will still be less than you can buy one anywhere else.


              80 Cherokee
              360 ci 727 with
              Comp cams 270 h
              NP208
              Edlebrock performer intake
              Holley 4180
              Msd total multi spark.
              4" rusty's springs
              Member, FSJ Prissy Restoration Association

              If you can't make it better why waste your time. No use repeating the orignal mistakes. I'm to old to push it that's why.

              Comment

              • trailscape
                258 I6
                • Feb 23, 2009
                • 338

                #22
                Looks nice and clean. I did a similar setup for mine, but put the relays in a radio shack project box.

                1974 J10 258 T18/D20
                Project since 2009. Collecting dust while in school.

                2002 Tundra - Daily Driver

                Comment

                • tomd
                  304 AMC
                  • May 04, 2002
                  • 1826

                  #23
                  Originally posted by serehill
                  I can not tell you why but these things are rediculous in cost if you look araund. It took a log time to find this cost. But I'll share LOL. @ sets will still be less than you can buy one anywhere else.

                  http://www.mossmotors.com/Shop/Searc...WebCatalogID=0
                  Hardware with those works too? That's def the cheapest I've seen!

                  I would love to find some black ones, but could try plasti dipping them.
                  71 J-4000 on a 76 Cherokee chassis with homemade flatbed
                  360/Th400/PT QT/3.07 D44s

                  Comment

                  • tomd
                    304 AMC
                    • May 04, 2002
                    • 1826

                    #24
                    Got those headlights housings, not real happy with them, don't fit as well as i'd like. May figure something out to run them, but next time i'll definately be getting Bosch E Codes or Hellas...
                    71 J-4000 on a 76 Cherokee chassis with homemade flatbed
                    360/Th400/PT QT/3.07 D44s

                    Comment

                    Working...
                    X