If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Andy
'81 Cherokee Laredo W/T 258/Weber 32/36 DGEV/HEI/176/208 AMC 20/Dana 44 3.31 gears
Status: Work in progress Miles: Less than 140K (as of the talk with the original/previous owner) "The Jeffrey"
Great work! I am at about the same spot as you but I see you are doing it better.
I wish I would have glazed the door and hood prior to epoxy and primer. I blasted, and epoxied and primed then block sanded. Now I have to go back and re epoxy and primer again and then probably block sand again. Live and learn, I guess.
I get excited looking at threads like this. It's gonna be great. It spent alot of time at a shop that wasn't progressing, and you moved it to another shop...is that right?
I love your chassis detail, and those Offenhauser valve covers. Sweet.
You haven't run that Lunati cam yet, right? I was seriously looking at that one.
Brad
(*Allowed to post while failed 'I am not a Bot' test results are under appeal)
Comment