Started the half doors this weekend...

[j20brett]

And got them both cut out after about 4 hours of work. Driver side took about 3.5 hs, and i made a pattern for the pass side, and it only took 30 min to finish it up lol. Anyways, heres a few pics...

O and special thanks to Janie and Bill for the FREE set of doors!!

First cut front side, back roughed in


Final Product...pre capped off

[yoslvr442]

gonna look good. you adding tubes above the bottom??

[j20brett]

TUbes above the bottom? Ill be adding tube to the top edges to weld onto.

[TexTJ209]

Looks good man.

[srobertsfsj]

very cool, will be watching this one closely.

[yoslvr442]

TUbes above the bottom? Ill be adding tube to the top edges to weld onto.

YEAH, thats what i meant. lol

[Headhoncho]

Whoever was using the sawzall must have slipped and cut the brow off (neutered) your truck. Looks like you're going to have to get another cool cab to replace that one.

Lookin' good so far.


JR

[misfittom138]

Nice. Started mine too, but did it a little different. Looks real good though, nice work!

[skeletor]

you sure those are half doors look like a 1/4 to me. are ya gonna make a hatch in them so you can store stuff? looks good.

[j20brett]

Prolly gonna put cupholders in them for sure...and a speaker at the bottom maybe...

And yes its browless and im proud of it

[jrlane]

Gonna be kind of cold in the winter or is this just a summer driver?

[Dmntxn77]

Gonna be kind of cold in the winter or is this just a summer driver?

Dont think its gonna be a problem where he lives...

http://www.weather.com/weather/wxclimatology/monthly/graph/USTX0089?from=36hr_bottomnav_undeclared

[j20brett]

Yeah even in the winter it only gets to about 30* at the worst where i wheel...and my heater works GREAT lol...id much rather be cooler in the summer

[Stouttrout]

Yeah even in the winter it only gets to about 30* at the worst where i wheel...and my heater works GREAT lol...id much rather be cooler in the summer

You Pansy!!!! A little 106* weather in Gilmer and you go chopping steel out looking good bud.

[j20brett]

Hmm forgot about this thread. Heres how they turned out