View Single Post
  #21  
Old 01-31-2002, 04:35 AM
fitron74 fitron74 is offline
Member
 
Join Date: Aug 29, 2001
Location: Warren, PA
Posts: 128
Post

sandmanb,
I had similar problem on my 87 gw. Fortunately my repair area was small and I used 22 ga. sheet metal, rust-proofed it with POR-15 then some fiberglas over top. For a larger area use a heavier gauge steel,16-18 ga.,if you can weld it, great! Use some thin aluminium sheet metal to form a pattern that can be used to more easily form and shape the steel sheet metal outside of the vehicle before you weld it on.Then use POR-15 to treat the top and bottom to stop any future rust for good.
Carry on,
Fitron74
__________________
Dale Swaney<br />Warren, PA
Reply With Quote