View Single Post
  #132  
Old 04-12-2020, 08:04 AM
wiley-moeracing wiley-moeracing is offline
350 Buick
 
Join Date: Feb 15, 2010
Location: arizona
Posts: 1,217
Try putting the shift linkage in low(1) and then adjust your shift linkage. Also be very careful when installing the transfer case back into the rear of the transmission, you do not want to let it hang there you must support the transfer case and carefully slide it onto the transmission so you do not tear the seals, use a friend or a jack to support the transfer case. Your shift linkage in the steering column may also be worn out which will not allow the pointer to align with the indicator.
Reply With Quote