Quote:
|
Originally Posted by bigun
Crom's M715 fenders were so bad it took 3 of us to get them to line up. Craigs dad and I lifted up and pushed in while Craig got the bolts started. That is when we decided next time would just sawzal the stock fenders and make our flairs
|
yeah I tried doing that alone and it was a no go. I had to trim about 2" of the inner fender flare from the top down to the cab corner and they go on..also a small notch for the fender flare in the front support and the lips on the corners of the air intake areas have to hammered flat..pretty much popped on after that. You can see the front bracket doesnt line up at all, I guess M715 have different lips maybe at the bumper. But its gettin there
