If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just finished installing the chrome on my 1971 and here are the two I purchased. I was able to get the large ones with the threaded bolt to work on both the skinny and fat chrome trim. The other ones were used where the bolt couldn't be accessed so a push-on clip was necessary. You will need to buy washers, lock washers and bolts from the hardware store. 10-24 thread.
Also if anyone needs the body clips that hold the stainless trim on older models, here is the info. Part # J04301 I think to do a whole Wagoneer you will need about 184 clips. I bought some years ago for like $1.10 a piece which is high in my book. These were $23.19 for 100, shipped.
Comment