International Full Size Jeep Association

International Full Size Jeep Association (http://www.ifsja.org/forums/vb/index.php)
-   Off-Road FSJ Tech (http://www.ifsja.org/forums/vb/forumdisplay.php?f=24)
-   -   Rusty's lift/ Chevy leaf Q (http://www.ifsja.org/forums/vb/showthread.php?t=64739)

Chad 02-22-2007 06:40 PM

Rusty's lift/ Chevy leaf Q
 
So I was looking at Rustys stie and all ofthe full lift kits are sua so you could get one of these and do a soa and gain a bit of lift hey... What would be the diff? Would it go something like this 3.5-4 would move up to a 5.5-6 and the 6 would be more like 8-9? The only thing would be is that youd have to buy diff shocks right ?


I got a set of 53 inch Chevy 1/2ton leafs do I need to take out any out of the packs for the front for better flex? What would happend if I wher to get them arched?

amc75matador 02-22-2007 09:13 PM

Flipping the spring over the axles will net you something like 5 inches or so, but you will need to weld on new spring pads on the tubes and also longer shocks, unless you rotate the lower shock mounts to the top of the tubes as well

Chad 02-22-2007 09:21 PM

5inches on any lift thats sold as sua and u turn it over for soa I was just woundering ...

I am useing the chevy springs ...

The rustys Q was for a friend that dont have internet...

AlsChopShop 02-28-2007 05:37 PM

SOA will net you 6-7 inches depending on the perch hieght.

Al


All times are GMT -6. The time now is 05:56 PM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.