International Full Size Jeep Association

International Full Size Jeep Association (http://www.ifsja.org/forums/vb/index.php)
-   General FSJ Discussion (http://www.ifsja.org/forums/vb/forumdisplay.php?f=11)
-   -   installing rear wiper arm on 91 GW (http://www.ifsja.org/forums/vb/showthread.php?t=174476)

Tbeach 02-19-2015 11:21 AM

installing rear wiper arm on 91 GW
 
Need help installing rear wiper arm. See attached pics. Purchased new rear wiper arm from TGW. There are no threads on the inside of the hole in the arm. What am I missing? Is the rear wiper motor not OEM?

Thanks for your help.https://www.dropbox.com/s/k8f6le8e5a...07%29.jpg?dl=0
https://www.dropbox.com/s/ts9gok29ls...80%29.jpg?dl=0

babywag 02-19-2015 11:37 AM

Flip the cover up on the rear wiper arm.
Install new arm on shaft.
Install retaining nut on shaft, and tighten VERY carefully.
Flip the cover down on the rear wiper arm.

acct21 02-20-2015 07:22 AM

Carefully dribble some PB Blaster on that big mounting but in the first pic. Do that monthly forever -- so if/when the day comes you have to remove the motor, it won't snap the threaded portion off the motor case.

Tbeach 02-20-2015 11:16 AM

thanks for the input. Will work on it this weekend.


All times are GMT -6. The time now is 11:29 AM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.