International Full Size Jeep Association

International Full Size Jeep Association (http://www.ifsja.org/forums/vb/index.php)
-   General FSJ Tech (http://www.ifsja.org/forums/vb/forumdisplay.php?f=10)
-   -   Rusty's Add-A-Leaf and Lift Block Question (http://www.ifsja.org/forums/vb/showthread.php?t=186503)

61Hawk 12-24-2018 04:55 PM

Rusty's Add-A-Leaf and Lift Block Question
 
I ordered a 2" lift block and 2" front add a leaf. I unboxed everything and I ended up getting what I think is an extra rear add-a-leaf. They are closed until Wednesday and I'd like to get started on these tomorrow. I only want to do a 2" lift, do I need to use the rear add-a-leaf or will that give me a 4" lift in the rear?

ZackN920 12-24-2018 08:00 PM

Screw the blocks, use the leafs only if they are for the 2" you want. What's the numbers on the suspected rear leafs?
I used 2" aal from Rusty's for my rear end and the number was ROP 2564. I didn't want blocks for my terribly fatigued springs.

Here's my thread if you want a long read and a bunch of pictures:
http://www.ifsja.org/forums/vb/showthread.php?t=184965

61Hawk 12-24-2018 09:08 PM

Thanks, along with the blocks, what I got was a pair of RC-2564 and a pair of RC-2123 (which are 3.5") for the front, I ordered RC-2125 (2"). I think this whole order got screwed up, the invoice says RC-2125. I didn't order the RC-2564... just ordered the 2" blocks and RC-2125.


All times are GMT -6. The time now is 09:11 PM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.