transmission cooler lines

[idoc]

I had to adjust the lines from the transmisson to the tranny cooler because I am changing the front clip. I took the lines out of the tranny, made the adjustment, went back to put the lines in and haden't marked which line went where.

Does it matter? Right now I have the upper most outlet from the tranny going to the top of the tranny cooler. Is this correct or do I need to switch them?

BTW it is a TH400.

Thanks

[ June 29, 2003, 08:50 PM: Message edited by: idoc ]

[gsmikie]

thats right

[idoc]

Thanks gsmikie.

You Rock.

[gsmikie]

cool

[Brule_Cherokee]

I don't think you can go wrong, one is outflow, one is inflow. The tranny cooler should work equally well whichever direction the fluid flows. I've always heard it doesn't matter which gets hooked to which side.

[gsmikie]

Originally posted by Brule_Cherokee:
I don't think you can go wrong, one is outflow, one is inflow. The tranny cooler should work equally well whichever direction the fluid flows. I've always heard it doesn't matter which gets hooked to which side.thats teu until you unhook the lines and hook them up to a flush machine or you un do the top line to pump the fluid into a buckek for a home flush or power drain job then it sure makes a mess

[gsmikie]

boy i got to get out of river beast's pain killers.............

[AJ Johnson]

lmao! send em to me!

[JeepKahn]

For simplicity sake, which line is out and which line is return?

[gsmikie]

on the trans upper is out (th400)

[JeepKahn]

Thanx, That was quik... Any tips on adjustments/mods to be done when installing cooler/changing filter/adding drainplug...

[ July 03, 2003, 12:31 AM: Message edited by: JeepKahn ]

[gsmikie]

run ford fluid type F