Advise on installing low range to quad-trac

[scott f]

Any heads up on installing the reduction unit in my BW1305. Also, it looks like a part-time has been added due to the locking hubs. Any advise.

[joe]

It's a direct bolt on that replaces the cover. The hassle is running the linkage. Don't forget to fill it with juice.

[J4GRAND]

You should have the hole for the low range linkage on the left side of the tranny hump under the driver's seat. If you have carpet, you'll have to pull it up. I have an extra low range lever and linkage if your looking for one.

[scott f]

I should be getting the linkage with the unit.
Thanks J4grand