PDA

View Full Version : New Frame Parts from Z&M Jeeps

zmjeeps
12-17-2008, 07:07 PM
Just a quick note to let everyone know about some new frame parts I just made. For those of us that have winter and snow and most importantly, RUST, these could help.
http://stores.zmjeeps.com/store/content/Cab_Mounts.jpg

http://stores.zmjeeps.com/store/content/Cab_Mounts_2.jpg
Cab Mounts. Larger one goes just behind the front spring hanger, smaller one goes at the rear of the cab for J-truck and behind front door on Wag/Chero. $60 large, $40 small.

http://stores.zmjeeps.com/store/content/Rear_Crossmember.JPG

Rear Crossmember. This one is the round kind from '74ish and earlier. Working on the later model as well. The pinion nose axle snubber is the bracket in the middle. $175 ea

http://stores.zmjeeps.com/store/content/Bed_Mount.JPG

This is the second bed mount (going front to rear). It sits on the angled portion of the frame. The one is the drivers' side. $55 ea

http://stores.zmjeeps.com/store/content/Shock_Mounts.jpg

Finally, rear shock mounts. Also the same for post mount style rear spring hanger supports. $25 ea

I made a couple of each while I was making them, so if you need some, let me know. These will be up on the website soon. Thanks,

Zack
ricbee
12-17-2008, 07:17 PM
Zack,any plans for rear spring hangers?
zmjeeps
12-17-2008, 07:30 PM
I could. Got a halfway decent set you can pop the rivets out of and send me (or drop off)? Thanks,

Zack
847JeffL
12-17-2008, 07:42 PM
Do you have an estimate on when your site will be done with the construction? I don't know what I'm looking at on alot of the stuff when I'm browsing.
zmjeeps
12-18-2008, 12:42 AM
If you are looking for something you don't see, just give us a call or send an email. We'll get you what you need. A website is a little bit like a Jeep. It's never 'done'.

Zack
zmjeeps
12-20-2008, 09:22 AM
Quick bump before this goes to the Vendors section...
1983 j10
12-21-2008, 11:51 AM
do the frame mounts work on either side.
zmjeeps
12-21-2008, 12:20 PM
Yes. The front mount I leave undrilled because the pattern is different L/R. The rear cab mount (smaller one) is the same left to right. For the second bed mount, there is a L/R version. Thanks,

Zack
zmjeeps
08-30-2010, 06:05 PM
Bump for Frame Mounts, Cab Mounts, Crossmember, Shock Mounts, Etc.

Zack