whos makes the best

[QUADRA-CLINT]

three inch body lift set up for the 90 grand wagoneer?i am redy to start the rise or the 90 and figured i would consult with the gurus before i drop a dime.



------------------
Quadraclint
79WAgLIMITED/ 90GW

[lrrh]

i'm not sure that anyone makes them for wagoneers, but the rule of thumb is every thing a cj needs we need two of....just to give you an idea as to how other people have gone about it.

_LRRH_

[1nathan]

Try Rough Country. They may not have your year listed, but you can usualy make it work.
I put a 3" body lift on my J-10. They did not have my truck's year listed, and I had to get creative on some of the bolts. Like adding some extra washers to take up the distance of extra long bolts...
It's worth a try.


------------------
Nathan Van Meter

'87 Grand Wagoneer,3" spring lift,31"X10.5" Dunlop RV,Front Receiver,Factory Brush Guard,360 V8, NP229 & 727,Edelbrock Intake & carb.

'87 J-10, 3" Body Lift,1.5" Add a Leafs, 35" BFG Mud Terrains, Factory Brush Guard, 360 V8, NP208 & 727, Holley Pro-Jection, Jacobs ignition

'81 GW " parts truck ", 360 V8, NP208 & 727, 130K on odometer

[jeepbob]

Performance Accesories makes a good 2" or 3" body lift for 75up Wags and Chers. It will also work on earlier models if you (a.) make the extra mounts or (b.) buy 2 kits.

------------------
65 wag. 360/edelbrock rb4/t400/20 t-case/4:10 d27/d44 tracloc/onboard air/onboard 110v power(no inverter)/1999 Lincoln t.c.leather buckets/taurus ctr console/winch/33x12.50/tunes/water proof door pads
soon to have new motor/d44frt/d60r(4:10)welded diff/custom bumpers
see ya in da mud

[QUADRA-CLINT]

thanks folks i think im goin with the performance kit.so the fun begines!

------------------
Quadraclint
79WAgLIMITED/ 90GW

[WINGO]

http://albums.photopoint.com/j/View?u=1330817&a=11068485&p=38536656&Sequence=0
Check out the following link:

http://www.4wheelparts.com/product2.asp?imseqn=303&occlass=P%2FA&c

For my '84 GW, I ordered Performance Accessories Kit # 903. This includes 10 blocks and all the hardware. You will actually need 12 blocks to do the job. The two additional blocks will not need hardware and will mount below two body mounts that are attached to the body and rest on the frame under the rear cargo area. The Performance Accessories part # for these blocks is 3E03 and cost $ 5.99 each.

So the whole kit will cost :

Kit 903 $ 69.95
2 additional blocks (part # E303) $ 11.98

Good Luck!

------------------
WINGO
Vineland, NJ
USA
1984 GW 360
Rough Country/Heckethorn 2 1/4" AAL (actual lift)
Rough Country/Heckethorn Nitro 9000 Shocks
Performance Accesories 3 " Body Lift

Soon to Have:
1- Rhino Grill
2- Alis-Chalmers Orange & Black Durabark exterior paint.
3- 33" X 12.50" tires

[This message has been edited by WINGO (edited January 28, 2001).]

[This message has been edited by WINGO (edited January 28, 2001).]

[This message has been edited by WINGO (edited January 28, 2001).]

[QUADRA-CLINT]

Wow!! now thats what i was lookin for...thanks Wingo and hey she looks pretty good,I would be happy with that height.But who knows,just look at River Beast!!!

------------------
Quadraclint
79WAgLIMITED/ 90GW