PDA

View Full Version : Poly bushings?


tnhunter
01-02-2002, 03:45 AM
Is there any manufactuer that make a FULL set of polyurethane busings for our FSJ's? The bushings on my JEEP are dry and hard and are in need of replacement. I thought I read earlier on the board about someone using delrin and make their own bushings!!??

As a side question, has anyone used HECKETHORN shocks? Is the quality as good as Rancho, etc??? :D :D

blt2krl
01-02-2002, 09:05 AM
If you check out www.espo.com (http://www.espo.com) you will find what your looking for. I assume your looking for body mounts? I believe they have the body mounts listed at $95 for the set. As far as the shocks, I have had both and thought the ranchos provided a smoother ride.

rhamby
01-03-2002, 03:49 AM
I got a complete set for my '79 at espo. The only ones they did not have a match for were the swaybar tie-rods (if you still use your sway bar). I got a set of four, 2-piece bushings that matched the outer dia. of the tapered end, and used a sharp blade to taper the bushings (which was really easy). Just FYI. I think I remember you mentioning springs in an earlier posting which they also have.