Cure for limpness (not what you think)

[ItchyRichy]

Now that I've gotten everyones attention, I'm searching for a cure for the limpness of my factory fog lamps on my 86 GWag. The lights work perfect (even with the factory switch!), but I can't get them to stay put. They always end up pointing down. I've tightened the locking nut on the back of the mounting bracket, but it seems like the ball-socket mounting mechanism is way too loose. Are there any set screws that I can tighten up or anything to stiffen the suckers up?
Thanks!

[Mud Thrasher]

Not sure exactly how yours is but if they are like any other fog light they mount on a bracket. The bracket is attached to the bumper. Then you have nuts or whatever else to hold them. Try putting lock washers on the nuts and that would do it.

[reddog]

Maybe try loosening them way up and squirting some silicone in the ball socket then tighten them back up and let it setup.

Kerry

[ClarkGriswald]

I cant belive we got, limpness, and ball socket all in the same thread..

[Bignblue]

...and don't forget 'squirt' and 'silicone,' Clark....