PDA

View Full Version : power booster removal


mark
11-28-2003, 03:57 PM
my 79 has taken her last trip tonite :( i drove her from the parkinglot into the shop(it just made it because i took the gas tank out last week)anyway i pulled the eng trans and tcase all together with the forklift.i used a cutting torch to make it easier(yea right 2 times i had a major fire going that i wasnt sure if i would get out or not......people like me should not be allowed to use these things :rolleyes: )
i took the master cyl off and was wondering what the proper way to remove the booster was.do you just remove the 4 nuts behind it or do you remove everything from inside?

Crazy_Jeepman
11-28-2003, 04:03 PM
Do it from under the Dash, easier and you have to go under there anyhow to pull the rod off the pedal. ;)

[ November 28, 2003, 11:09 PM: Message edited by: Crazy_Jeepman ]

mark
11-29-2003, 05:18 AM
thanks will do CJ!