View Full Version : Wanted pics of Cherokees on 38s
TealJ
08-01-2007, 08:33 AM
We are getting ready to lift the chief and i was just wanting to see some other cherokees on 38s and tell the amount and what kind of lift.
Gonna try to lift it enough where is dont have do to hardly any trimming on the flares.
So post up what you got
thanks in adavanced :fsj:
Bob Barry
08-01-2007, 09:53 AM
SOA and rear shackle-inversion to get about 8" of lift. Definitely needed to trim to fit, but mine was a NT. The actual tire-size is 38"x13", though the nominal size is 325/85-16":
http://www.drbob.tqhosting.com/rmb/rmb042306_28.jpg
TealJ
08-01-2007, 11:10 AM
tough looking rig
4LoTJ
08-01-2007, 11:16 AM
tough looking rig
How many Ginsu knives did it take to trim those fenders? :D
Bob Barry
08-01-2007, 12:06 PM
Five minutes with a cutoff wheel...:)
They look ragged in that picture because of the mud, but they're actually smooth with a 3/4" lip that I bent into the wheelwell. I've got to open up the rear a bit more to make way for the bigger tires; those I did hack-up at a Jeep show with a sawzall for a demonstration on how to gain clearance for larger tires... :D
AlsChopShop
08-01-2007, 12:44 PM
you'll need about 8-9" of lift for 38's without touching the widetrack flares.
i'm planning SOA on 2-3" lift springs i'm already running, and i should be able to run 37-38's.
Al
12.50-38 TSL's on 10" wide wheels
4" lift springs in front with shackle reversal for another3" so about 7" lift in front. Rear was add-a-leaf packed with 4" blocks and a traction leaf between block and axle, sat level so about 7" rear also.
Front tires rubbed at rear of flare, I should have shifted the front end a little farther ahead when I did the shackle reversal. Rear tires rubbed on front edge of rear flares at full stuff. I couldv'e done the rear a little different, and probably would not have been a problem.
baja
RAMBLINFSJ
08-01-2007, 03:53 PM
Man baja, you couldn't have found a Ford to do that to. Poor Buick. It appears the roof of a Buick is pretty strong.
There was a Ferd Gran Torino 4dr on the other side of the Buick:thumbsup:
Slick Willie
08-06-2007, 12:09 PM
All the pics of Wag's on 38's that I have are of hacked fenders. This one is SOA only, with fenders cut out. 38" hawgs. :thumbsup:
http://www.longhornoffroad.com/garage/gallery212/d/3479-2/Chris_+Waggy+on+38_s.jpg
It has a good amount of flex shots in this gallery:
http://www.longhornoffroad.com/garage/gallery212/v/Shiloh+Ridge+Alto+TX/
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.