Door Bushings ?

[Simple Kind of Man]

Where do I get them and are they different from wag to j-truck? Also a part# would be nice. TIA

[joe]

I don't know if you can get just the bushings. They do come with new pins. Just go into any auto parts store. They're in the generic/help section. 2 pins to a pagkage.

[Simple Kind of Man]

Been there done that. Azone,Advance.O'Rillys today & they all had bushings that would fit my pins but were to thick for the hinge. Guess I will go to NAPA this week. The bushings that I bought measured .346 I.D. .490 O.D and the O.D. is way to thick. Can anyone tell me the O.D. on the bushings that I need ?

[Simple Kind of Man]

btt; anyone know the outside diameter of these bushings ?

[joe]

Can you comepare the ones you bought that are too big with the ones that come with new pins?
You don't mention if your rig is a 65 or 85 but a friend just went through this a few months ago on his 71 wag. He bought 2 sets of pins/bushings at Autozone but those were the only two sets left on the rack so he got the other two sets needed at Napa on the way home. Everything fit just like it should for his 71.

[Simple Kind of Man]

I have an '81 j10 and put '80 wag doors on it today. None of the bushings I looked at today were as long or as thin as the ones on the doors now. The ones I bought today had the inside & outside measurements on the back of the package, thats why I asked for the O.D. numbers.