show your Jtruck rear bumpers

[fulsizjeep]

Well, one of the casualties in Moab last month was a pretzeled rear bumper on the J20. It is some aftermarket chrome blingy thing that was not up for the task anyways. :D

http://jubileejeeps.org/picture_library/j20rearbumpertwist.jpg

So, if you have a rear bumper solution that you like with for a Jtruck, please show it off here. Lookin for some ideers... Thanks! :thumbsup:

[bigun]

Flint if you look at the front and rear bumpers on the chevy and the rear of the dodge of the thread Black Bart's Birthday bash. Those are all Black Bart specials!

[KaiserMan]

Here is the my home made step bumper.

http://fsjworld.tenmagazines.com/gallery/TAR/89680.jpg

http://i9.photobucket.com/albums/a58/CRNJG/p1010006.jpg
Here is the stock bumper I'm fixing up. I've allready straightened it and patched the one small area or rust through.

[Gambler68]

if you want to tackle it, you can have the one off my 82 bed if it'll bolt up.

although I'd hold out for a BB special though.

[fulsizjeep]

I thought those looked like Black Bart solutions there Charlie! :thumbsup:

I would like a step down to the top of the receiver hitch. It is welded in. Not crazy about that, but it is stout enough to take the weight of the truck hauling a few hundred lbs of tools and spare parts. :cool:

Thomas, that looks great! :thumbsup:

Ryan, I wondered if that one was any good. We are indeed looking to Black Bart for the final solution though. :fsj:

Keep em coming, thanks!

[Tad]

There was this...
http://members.cox.net/ttsfabworks/peterearbumper.JPG
...that is now someplace in the UP.

[bigun]

We stood black Bart's old blazer on the front left corner of the bumper and the front left tire on a rock coming down one of the nastier trails you go up turn around and come back down. In trying to turn it we came to a halt in the above position which was quite fun as I hadn't put on my seat belt. After I pulled myself off Craig he was able to release the clutch and get the other tires on the ground back up and complete the turn. All it did to the end plate on the bumper was put a scratch in it!!

[Mikel]

http://img156.imageshack.us/img156/5589/11128360599271111690417475rearej0.jpg

[Kaiser]

http://img156.imageshack.us/img156/5589/11128360599271111690417475rearej0.jpg


My Gawd that looks familiar! I'll post back up when my rear is done.
http://i30.photobucket.com/albums/c327/gstupid/P1301932.jpg

[J10Joe]

here's the J20 bumper/dozer balde
http://i27.photobucket.com/albums/c197/j10joe/P1170001.jpg

and the J10 just has a simple box steel job, i kinda like it
http://i27.photobucket.com/albums/c197/j10joe/P8050008.jpg

[TexTJ209]

Here is the my home made step bumper.

http://fsjworld.tenmagazines.com/gallery/TAR/89680.jpg




I still can't believe that isn't a factory bumper, you did an awesome job on it.

Heres my old hunk of junk. ;)
http://i131.photobucket.com/albums/p308/TexTJ209/1977%20Jeep%20J10%20Pickup/IMG_01511.jpg

[BKCowGod]

I'm a huge fan of the bumper that came on my 2k - no brand plate or anything, but it lets the tailgate swing all the way down...
http://www.kuhgott.com/temp/jeep2/images/IMG_1145.jpg

[KaiserMan]

I'm a huge fan of the bumper that came on my 2k - no brand plate or anything, but it lets the tailgate swing all the way down...
http://www.kuhgott.com/temp/jeep2/images/IMG_1145.jpg

I sooo want to get me one of those wrap around bumpers. They look great.

[The PIG Smith]

Here's my rear bumper! LOL!

http://www.fullsizejeeps.com/gallery/albums/uploads/1963-1987-Pickups/USMCJ20_008b.jpg

[H Callaway]

This is the original factory option on a Thriftside.
http://www.fsjworld.com/gallery/hcallaway/91881.jpg
This was the dealer installed Thriftside Rear Bumper.
I think it cost about $30 at the parts counter and $7 to install from the dealer. I have some original dealer Bumper Literature around here.
http://im1.shutterfly.com/procserv/47b5d625b3127cce93140e81032400000016108BYtmTFwybG

[shackwrrr]

I have the bjs dozer rear with the reciver need I say more or post pics

[J10Mike]

Dozer II from BJ's.
http://12.29.16.230/mmimages/bumperpics/dozer2c.jpg

[Jeep_Guy]

http://img184.imageshack.us/img184/250/rbumpoy2.jpg
Since taking that pic, I've made an endcap out of some scrap plywood, which actually came out pretty nice. No sharp edges allowed for state safety inspection. I need to clean up the rust and go over it with some of that chrome bumper paint. Eventually I would like to just replace it, maybe with a BJ's Dozer II.

http://img184.imageshack.us/img184/8692/rbumptg1234qi9.jpg
What your looking at here is whats left of the bumper on my 85 j10, or rather whats left of the bumper brackets, lol. It was like that when I got it.

http://img184.imageshack.us/img184/4153/j10rearbumper2zj1.jpg
Heres a Flex-N-Gate rear bumper I got at the u-pull-it for $25. It looks okay in the pic, but its actually in pretty bad shape and is gonna take some work before it's ready to be mounted up.

[fulsizjeep]

We got quite a variety here! :thumbsup:

Mike, I like that Dozer design. Just don't need the receiver that high. What kind of drop you use on that?

The Pig Smith gots a serious bumper starting just behind the cab! :eek: Thanks, keep em coming.

[joe]

Here is the my home made step bumper.

http://fsjworld.tenmagazines.com/gallery/TAR/89680.jpg

Excellent job Thomas! :thumbsup:

[KaiserMan]

Excellent job Thomas! :thumbsup:

Thanks. I tried to copy the factory design as much as possible. I'm happy with it, until I find a wrap around bumper anyway.

[J10Mike]

We got quite a variety here! :thumbsup:

Mike, I like that Dozer design. Just don't need the receiver that high. What kind of drop you use on that?

The Pig Smith gots a serious bumper starting just behind the cab! :eek: Thanks, keep em coming.
Flint,
I have never used the receiver for it's intended purpose. Well frankly speaking, it's too high.
If I need to tow anything, I'll use my DD with Cummins.

[Stuka]

http://stuka.fsjnetwork.com/fsj/j10-6inch/rear-driver.jpg