BJ's Off Road

[FSJ Guy]

Since my wife is driving SlushPuppy to work now, a WORKING fuel gauge is a little more important than it used to be. :eek:

So I ordered one. And of course, while I'm messing with the fuel tank, I'll need to replace check valves, grommets, fuel socks, parking lights and chrome bezels, turn signal lights and assemblies, rear tailgate weather-stripping and the inner and outer window wipes. :D

And for everyone complaining about high shipping from BJ's, it only came out to about $13 for UPS ground shipping to CO.

I'm so excited!!! :D

[Tigger4X]

It was only $13 shipping for all of those items :eek: or was that just for the fuel gauge :confused:

[FSJ Guy]

For everything. Maybe once you get over $200 there's a shipping discount! LOL!

[Jeep_Guy]

My Bjs order had reasonable shipping. It took a while to arrive, but thats understandable since I'm on the other side of the country. Compared to another online part source I was considering, shipping costed about the same. With the IFSJA discount, buying the part from BJs turned out to be cheaper in the end anyway.

[troopermc]

My Bjs order had reasonable shipping. It took a while to arrive, but thats understandable since I'm on the other side of the country. Compared to another online part source I was considering, shipping costed about the same. With the IFSJA discount, buying the part from BJs turned out to be cheaper in the end anyway.
__________________


I totally agree, In addition to the IFSJA discount, they usually have another promo code out there i their newsletters. I just placed another order and got an additional 5% off using the most recent code....

[nw_upstart]

Last order I placed I figured would be a few days away, with processing time, shipping, etc. But when the guy showed up the next morning with my package I was impressed. The next day delivery really showed me that they get the orders out as soon as you place 'em.

[scantar]

Here's a "me too" post re: BJ's.

I just ordered (like 15 minutes ago, Ryan ;) - jk) a gate window lift channel, couple flex tracks, gate window to channel seal and some retaining clips and the total shipping charge was under $10. I've heard in the past about high ship charges but I sure didn't see them.

Steve

[billyrb]

Sometimes the rates are high depending on where the parts are being shipped to and the size of the package. But, we are getting some better rates on smaller packages with UPS now, so the prices are better. Now, for the lift kits, those can get high, but folks tend to forget that we are shipping a 300+ lb. kit, and UPS isn't terribly fond of heavy stuff like that :)

[FSJ Guy]

I got my first shipment of stuff and man o man!!! This stuff is NICE!!! If you've never seen NEW parking light lenses, you will be FLOORED!! And now I will finally have a turn signal housing that isn't half falling out!!!

YIPPEEEEE!!!!!! :D :D :D

[motox-010]

Speaking of BJ's, when will the Cliff Hanger front bumpers be made availible again?

[billyrb]

they are on the list, but will come after the dozers are finished. We have the prototype Dozer Rear with Swing-out tire carrier on it's way to me as we speak (should have it early next week). I'll test fit it and make any changes, then we'll have it in production. After that, the Cliffhanger Rear with Swing-out tire carrier is next, and that should be within a few weeks. Once that is done / worked out, we'll move on to the Cliffhanger fronts.

[youngjeeper]

they are on the list, but will come after the dozers are finished. We have the prototype Dozer Rear with Swing-out tire carrier on it's way to me as we speak (should have it early next week). I'll test fit it and make any changes, then we'll have it in production. After that, the Cliffhanger Rear with Swing-out tire carrier is next, and that should be within a few weeks. Once that is done / worked out, we'll move on to the Cliffhanger fronts.

"Next Week" must be an automated response from BJ's.

[Kaiser]

BJ's has ALWAYS been good to me with shipping and other idiocyncracies. Great selection, and if its in stock (usually the case) they get it out the door. They've been good to me with some returns too since I've got a Gladiator, and not everything fits, but some do.
:thumbsup: for BJ's.

[scantar]

Just followin' up on my order from BJ's...

:thumbsup: :thumbsup:

Packed awesome and shipped fast too. From time of order to my doorstep took 7 days (with a weekend in there).

Not to mention these are high quality parts, not some cheapo offshore manufacture things you'll find at your McParts store. I'm very impressed with BJ's

Steve