Edelbrock throttle cable adaptor

[fredws]

I am planning on installing an Edelbrock performer manifold, 1406 carb this Sat. I ordered the throttle cable adaptor for this, but it doesn't have any instructions or anything with it. Is it pretty obvious when you get in there how it hooks up? If not, do any of you guys that have done this have a pic you could post, or e-mail to me?
Thanks!

[Hump]

Fred, straight from the Summit and Jegs catalogs it states, "GM/AMC style throttle linkage with bolt on adapter kits available for Ford and Chrysler applications".

I'm looking at your sig and I don't know if the throttle linkage for your wag is AMC, or Chryco. My understanding though is that it should be a straight bolt up, without the adapter kit, for our rigs.

[garoo_one]

HAVE A PERFORMER INTAKE AS WELL AND YES A STRAIGHT BOLT UP GOOD LUCK AND ENJOY THE DIFFERENCE

[porchpiggy]

Do you mean the bracket that bolts the cable to the manifold? It is just a little longer than the oe bracket, for some reason the eddie manifold puts the bolt holes on the manifold further away from the carb, just a little bit.

[garoo_one]

i used the oroginal from my amc intake and still works like a charm