Dana 44WT Swap

[Guadzilla]

I've got a 82 Wagoneer with a 208 T- :confused: Case and am trying to figure out the best way to get the Dana 44 WT's from a J10 under it...The rear wasn't a problem...Bolted right up after the perches were moved....However the front has the pumkin on the Pass side and my 208 is a DS dump....What are my options ??? Axle flip??? Transfer case swap ???

[Crazy_Jeepman]

Well I see you have a Chevy in there and must have used an adaptor to the AMC TF727 and NP208. Dodge NP208 would be an option, it is a pass drop and will bolt up to the trans in your rig, or pull the trans and T-Case and go with a Chevy Trans and T- Case of your choice, TH400/NP208/NP205/ 700R4 and the NP208, endless combos I guess. Welcome to the Forum by the way. ;)
And this Ebay setup would be nice (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33727&item=2465219430)

[Guadzilla]

Thanx for the info....I found the NP208 post in the wanted section and replied to Brad and took him up on his offer....It's great to find this much info on FSJ's in one place....I'm sure i'll have more ???'s soon....Thanx again....Mike