PDA

View Full Version : What years will fit 75


Myke
03-13-2007, 08:48 PM
What years are interchangeable for a 75 Cherokee? I need parts for interior, exterior and driveline. Also will parts from other models fit? Does anybody know a good source or catalog I can get? I've checked eBay, but not sure what years will fit. I also need a 360 complete motor close to Colorado Springs.

chrisnsarah
03-13-2007, 09:01 PM
There is a long list and it varies depending on what you are looking for, and if you want to remain stock. If you are going a purist route, then you need to stick with '74 or '75.

For example, the gauge cluster is the same as a '73 and '74. The cluster on up to '86 will fit, but the gauges were redesigned in '76.

The frames were revised in '76, so the springs are different in the rear at least. The front axle spindles were strengthened in '76.

TH400/ QT from any year will fit.

The ignition systen was the same from '75-'77, but any year system will work if you want to modify.

A complete 360 from any Jeep year will fit. Just be sure to get the correct flywheel or flexplate.

Interior parts from any year should bolt in. Door and tailgate latches and armrests changed in '79.


I could find tons more stuff, since my '75 was a conglomeration of parts, but this should be good for starters. If you stay with '74-'78 rigs, you will have the easiest time.