Doubler 205 x member question

[elbastardo]

How would you guys best recomend bolting the 205 to the frame? The only bolt holes are the 2 top 5/8" holes that i can see using. Any ideas? or pics?

[budojeepr]

How would you guys best recomend bolting the 205 to the frame? The only bolt holes are the 2 top 5/8" holes that i can see using. Any ideas? or pics?You basically support the bottom of the 203. The 205 hangs off of the 203.

See this page: http://www.offroaddesign.com/catalog/doubler.htm

I ended up making my own crossmember instead of modifying a stock one like they did, but the concept's the same. My t-cases are VERY close to the hump floorboard, but nothing hangs down beneath the framerails.

Good luck!

[Desert Beast]

http://www.southbaycustoms.com/fullsizejeeps/buildup/rockwells/update/DSC01708%20(Medium).JPG

im also going to put a support on the 205 going to the x-member for additional strength.

[budojeepr]

...had a nice pic there...Oooo, I like the way you mount yours to the frame! Much easier to deal with than mine! :thumbsup: That front rail would never clear my front drive shaft, tho...

[Desert Beast]

ya that front bar would not work w/ normal axles. i run hi-hi pinion axles though.

[elbastardo]

I didnt realise that i just needed to support the 205. Thanks for the replies and pics:thumbsup: . Nice fabwork DB, congrats on getting it running:drivin: