Good way to clean factory turbines?

[francis higgins]

The wheels are very nice, but there is some stubborn grease/carbon/etc. stuck on the painted portions. What should I use to get them clean? Thanks!

------------------
Francis Higgins
1990 GW 360/727/229 - all stock w/ 138k
1993 Mustang 5.0 LX Hatch

[Iron Horse]

There are aftermarket alum. wheel cleaners avail. at just about any Walmart. However, the "stains" you may be seeing might be under the wheels clearcoat. If that is the case then you'll need to strip the old clearcoat off, clean/polish the alum. and then reapply a new clear coat. Here's a kit that does just that: http://www.por15.com/restorationkits.html#WheelRestorationPolishingKit

------------------
Andy

Iron Horse: 1988 GW 360/TF727/NP229/D44's F/R, 31x10.5 BFG AT's stuffed in stock wheel wells, and no WOOD.
soon to have:
BDS 4" lift, 3" body lift, 33"-35" BFG MT's, complete repaint and body work