Another quarda track question

[JNErotten]

Some vaccum hoses were screewed up and I need help. They had the lines from the diaphram swith hooked onto some t-valve on the manifold. Nothing was going to the swith in the glove box. I joined to lines to the swith and hooked them up to the diaphram and it goes in and out of edrive (judgeing by the little light) fine now. exept for me previous post (please read that also) My question is, there are three lines comeing out of the vacuum swith and three lines that looks very much like there related going to the diaphram, but the diaphram only has two hose nobs..any idea where the third lines supposed to run? thanks, and feel free to let me know if you need more info, I'll jump under it at anytime to look.

Thanks Again,
J

[Crazy_Jeepman]

one line goes to the reserve vacume canister, (black ball on firewall directly behind air cleaner, the other two lines go to the Q-Trac. ;)

[JNErotten]

I got that one hooked up, but there just seems to be a line (where the metal lines start) that piggy-backs the other two all the way back to the diaphram. So, it's missing something at both ends, but is grouped with the other two metal lines that do have hoses from the swith and then hoses to the diaphram all the way down, but it's end hose goes nowhere. Plus, where the three metal lines start, this one is kinda looped to point down instead of up like the other two. I know this sounds confusing, but I'm sure you all are used to that.

Thanks,
J

[Langdon]

So many Q-trac questions...been there too ;)

That 'orphan' hard line is just a vent for the transfer case. It allows condensation to escape, preventing buildup of water in the case...both axles have similar vent lines.
:cool:

[JNErotten]

Cool, so can you tell me where that line goes into the transfer case?