Question about 6" Lift

[marine02]

Hey, I am installing my 6" Lift this weekend along with the Tires (If they get here by Friday). Does anyone know if I'll need a Pittman Arm or Drive Shaft extension? I want to get this done Saturday and want to be ready for what ever I might need. If you can think of anything I might need I would appreciate any help. Thanks in advance. :confused:

[River Beast]

You will deifinitely need a 4" drop pitman arm...
brakeline extentions and possibly lengthen your shafts or at least the front one.

[GaWag]

I installed this kit. You will need some brake line adapters for the rear. You can get them at NAPA. The drive shafts Will be long enough but you will need to install wedges. I installed six degree shims. I did not do this at first and about 300 miles later I was on the side of the road with a broken driveshaft. Other than that It's not too bad.

Steve

E-mail me if you have any more specific questions.

[marine02]

Thanks for the help I have the feeling your helping avoid a headache.

[marine02]

Where would I find a 4" drop pitman arm?

[Stuka]

The 6" kit should have come with a drop pimtan arm. I would give rusty a call if it didnt. I believe his site claims that it does come with one, unless you bought only the leaf springs.

[marine02]

Originally posted by Stuka:
The 6" kit should have come with a drop pimtan arm. I would give rusty a call if it didnt. I believe his site claims that it does come with one, unless you bought only the leaf springs.Im an idiot it is in the bottom of the box thanks

[Stuka]

smile.gif