42's 60's and hummers on an FSJ buggy

[welchct]

I am wondring if I am going to need to recenter the hummer beadlocks on my jeep buggy. I am running a 60 out of a 95 CTD dodge with the unit barings. I think at full turn it will rub the springs seance I am going to have to out board them to clear the pumken. i mocked them up to day and there was only about 11" of clearance with the wheels straight.

[sjlplat]

I'm assuming it's a standard full-width Dodge D60, and you're planning to run leaf springs in the stock locations on the axle. If that's the case, you will have to recenter HMMWV wheels to clear the springs.

[Crazy_Jeepman]

Recenter the wheels or swap out the hubs for Dually Hubs if you can do that with the Unit Bearing setup

[oldcj5guy]

The recentered set of hummer rims i have are a nice fit. The set of stock rims i held up weren't even close on either my j truck or wag

[welchct]

what is your back spacing? I was thinking of about 4 inches

[sjlplat]

what is your back spacing? I was thinking of about 4 inches

4 to 4.5 is the most popular. That'll work just fine.