Rusty pictures of my Cherokee

[M1Garandfan]

At the attached URL are pictures of my Cherokee. Any ideas on how to go about fixing this mess?

I'm gonna order a floorboard for the passanger side. I'm not sure how to tackle the passenger side rear area.

http://home.earthlink.net/~garandman/index.html

[Stuka]

cut the floorout and weld in new sheet metall for the parts with holes. for the other parts i would wire wheel it down, then naval jelly it to eat the rust up, then por15 it and primer/paint.

[M1Garandfan]

What is por15

[Stuka]

http://www.por15.com/

[Doug B.]

OK, you got me curious about the POR-15. Is it economable to to the entire floor of a vehicle, or how about doing the under carriage? I am desparate for anything that would protect against rust.

BTW...holes in the floor boards are a good place to drop the aluminum beverage containers through.

[timmirvin]

Originally posted by Doug B.:
BTW...holes in the floor boards are a good place to drop the aluminum beverage containers through.LMAOLAMF :D :D

[M1Garandfan]

I thought about leaving one hole and rigging it up so I can dump an old can of oil on tailgaters, sorta like James Bond!