rotor and caliper q's

[The Donzi]

Can I use my 79 cherokee rotors and calipers and manual hubs with a 75 J20 knuckle, spindle and stub shaft set. I'm trying to convert to crossover steering and 8 lug at the same time. Thanks...All input welcomed ;)

[Crazy_Jeepman]

Well your Cherokee rotors are #1 6 lug, #2 To small in diameter, so No. However the Manual locking hubs will work. ;)

[Bob Barry]

Just use the J20 knuckles, caliper-bracket and rotor along with the spindle and hub, and you'll be 8-lug and have the passenger-side flat-top to be machined for high-steer.

[The Donzi]

Bob, will my calipers work with the j20 rotors?

[Crazy_Jeepman]

Calipers are the same.