Source for window regulators

[243]

All of my windows require a lot of force to roll up and down. I am still working on the motor transplant but I'll have to tackle the problem soon.

Is this a symptom of dry/worn regulators, bad felt channels, adjustment or a combination of each?

243

[88gwag]

on wags my only experience is with p/windas, but with them its usually a combination and the drag kills the drive belt. silicon and a dab of grease and adjustment will prolly do the trick.

------------------
andyd

[jeepbob]

No actually it is the result of only having to turn the crank 1.5 turns to raise and lower the windows. No wimpy 6 turns in an earlier FSJ.

------------------
65 wag. 360/edelbrock rb4/t400/20 t-case/4:10 d27/d44 tracloc/onboard air/onboard 110v power(no inverter)/1999 Lincoln t.c.leather buckets/taurus ctr console/winch/33x12.50/tunes/water proof door pads
soon to have new motor/d44frt/d60r(4:10)welded diff/custom bumpers
see ya in da mud

[88gwag]

oh i see the real power windows...all the power you got http://www.ifsja.org/ubb/biggrin.gif

------------------
andyd