fuel injection systems??

[larry raup]

I am currently in the process of restoring a 82 wag from a junker to a every day reliable vehicle. I have the engine done a rebuild and am just waiting for the fuel injection system that i ordered from custom efis. He just emailed me and said that it is gonna be acouple MORE months... I was wandering if anyone knew of any other place i can order a fuel injection system for my wag. Also i don't want to spend 2 grand for it. thanx

[SpruceMoose]

love my analog holley projection i got off ebay for 330 bucks. plus another 130 for the manifold and another 100 for the closed-loop option.

sm.

[The Anti-Chrysler]

Howell or Holley. Holley is your cheapest option, Howell is a little better IMHO, since they use GM injection systems.

[mccullough_89_GW]

I also love my 300 dollar analog holley I got off of ebay...i haven't kicked in the extra 150 for the closed loop kit yet...but might someday...

anyhooo it's sweet...under 400 installed on stock manifold....

[Cecil14]

What does one need to look for as far as applications of the holley FI? Will a kit for a SBC fit motors?

Anthony

[SpruceMoose]

its a generic kit, 670 cfm, 2bbl, either analog or digital. it fits a square-bore 4bbl intake. the throttle bodies are the same for the analog or digital kits.

sm.

[will e]

another vote for the Holley Kit. I put one on my mustang about 10 years ago. Had an injector go bad once but other than that it has been very reliable. Better Gas Milage and throttle response. I am going to switch it over to my Wagon one day, I picked up a tri power manifold for my 351C in my mustang.

[Cecil14]

So I could get a kit off ebay and put it on my stroker then....? hehehe oh the possibilities...

Thanks,
Anthony

[SpruceMoose]

the controller is only set to be used with an 8 cylinder ignition system. dont know how it would react to a 6 banger. maybe flow too much gas???

sm.

[Cecil14]

Not sure on the size, might be ok. Running a q-jet right now...hehe, the 8 cylinder thing could be bad though.

Thanks,
Anthony

[Cecil14]

Maybe I could use the V8 throttle body with the 6cyl projection control box???

Anthony

[KYJ10]

The cheapest, and just as good, system out there is customefis.com . He did mine, it is several hundred cheaper then any other, and it is easy to install. Works great and John knows his stuff. I did'nt even have to change chips after the install. He will burn you as many as you need to get it tuned. Just my .02. Dennis

[mccullough_89_GW]

i believe they have a single barrel that is speifically made for the 258....
I 've seen them for a cj type of jeep any how...

[Cecil14]

That's only 300cfm though...it'd be too small for the stroker I think.

Anthony

[ July 06, 2003, 11:07 PM: Message edited by: Cecil14 ]