What is the recommended method for removing the body?

[243]

First, I have a typical two car garage with an 8' ceiling, should I plan to remove the body in the driveway?

I want to remove the body without damaging it. I would also like to have the ability to transport it; first, to have it media blasted and second to have the interior and underside sprayed with bedliner. Do I need to rig up a cradle with casters using the body mounts?

I don't have a shop but would like to make every effort possible to do the body and frame right the first time. I see no other way without separating the two.


------------------
243

Ol'e Blue
79 Wagoneer 401/T400/QT

http://www.0hassleisp.com/dwilk/79sig2.jpg

Red 75 Wagoneer (project)
Mean Green 76 Wagoneer (parts car)
99 Dodge Ram TD

cummins_isb@hotmail.com

[OBX-AUTOMOTIVE]

55 GAL DRUMS--4 BEAMES MADE OUT OF 2X8s---4****JACK IT UP AND SET IT ON THE BEAMS^^^^^^^^THEN ROLL OUT THE FRAME OUT>>>>>>>YOU COULD WORK OFF THE BEAM IN YOUR GARAGE....IF IT'S SAFE..COULD CAVE YOUR ROOF IN...... DO IT OUTSIDE*****OR WHAT EVER...MY DISCLAMER...THATS HOW 'I' WOULD DO IT AND HAVE.......GARY

------------------

[OBX-AUTOMOTIVE]

OH!! GOOD LUCK THERE 243..BY THE BY WHY DON'T YOU SAND BLAST AND UNDERCOAT YOURSELF????????YOU CAN GET A BLASTER FOR UNDER 50.00..20LB....GARY

------------------

[OBX-AUTOMOTIVE]

HO!!ONE OTHER THING..IT'S NOT EAZY TO PUT IT UP ON THE DRUMS...LOTS OF JACKING..YOU COULD GET SOMEONE TO LIFT IT UP FOR YOU..$$$$$$ THE IDEA IS TO SAVE MONEY...YOU KNOW WHAT I SAY ALL THE TIME*****DO IT YOURSELF..YOU CAN DO IT...HELL**** I GOT FAITH IN YOU***** GARY

------------------