PDA

View Full Version : Will this Work

Marcus Fox
04-29-2006, 07:10 PM
Will this spool work in a Dana 60-2
http://cgi.ebay.com/ebaymotors/DANA-60-35-SPLINE-SPOOL-4-10-DOWN_W0QQcmdZViewItemQQcategoryZ33731QQitemZ805974 3419QQrdZ1QQsspagenameZWD1V

I was wondering if the c-clip type axles have to have a different syle spool for them to work.


Oh and want fuel pump would work the best in the 350 buick. A Holley red or blue fuel pump??

Thanks guys...
Sambo
05-03-2006, 07:45 AM
no most rear end axles(d60) are 30 spline...the spool is 35 spline for front applications
Stuka
05-03-2006, 07:51 AM
A lot of the D60-2's ARE 35 spline, while most rear D60-3's are 30. So you need to verify if it is or not.

EDIT: The D60-2 is NOT a c-clip axle. The only c-clip axle dana ever made was the rear D35. It usesbearing retainer plates similar to a ford 9".
shackwrrr
05-03-2006, 12:00 PM
whats the diff between a d60-2 and a d60? is it semi float instead of FF because if its FF it doesent have c clips
J4GRAND
05-03-2006, 12:46 PM
The D60-2 is a 5 lug, semi-floater just like the D44 and DOES NOT use c-clips. The D60-3 is the 8 lug, full-floater.
Stuka
05-03-2006, 01:57 PM
The D60-2 is a 5 lug, semi-floater just like the D44 and DOES NOT use c-clips. The D60-3 is the 8 lug, full-floater.

There are 8 lug D60-2's as well, not all are 5 lug. Jeep and ford both used 5 and 8 lug versions.
KaiserMan
05-03-2006, 02:12 PM
There are 8 lug D60-2's as well, not all are 5 lug. Jeep and ford both used 5 and 8 lug versions.

What did Jeep use an 8 lug 60-2 in? I've never heard of this.
Stuka
05-03-2006, 05:42 PM
I may be mistake on the Jeep part, could have sworn I had seen an 8 lug J4000 with a D60-2. However, I know I have seen fords with them, and they still use them on some 3/4 ton vans. Our FedEx guy has an 00 3/4 ton ford van with a D60-2 in back.