poly gas tank

[mark]

my 76 has a poly tank in it.i just removed it to mount my new springs and hangers.the rubber hose that feeds the tank is all dryrotted and cracked.it looks longer and different than the one in the 76 tsm manual.it goes through the hole in the frame x member in the rear.where can i get a replacement hose for this?i was just at the raybuck site and didnt see anything.

[Tad]

Contact an area industrial hose and rubber company. They can get any size, type and length you need. It will be priced b the foot and a lot cheaper than any dealer or parts store.

[Crazy_Jeepman]

Strange you have a Polly Tank in a 76...Replacement maybe? I have used hoses but I could not say they would fit, as they are from a metal tank.

[mark]

its a replacement.the hose has some bends in it .i dont think a straight pc will work.ill take a pic.i think the prev owner used a rad hose.

[Tad]

Stuff I got was flex, but not rad hose.
For the 1970 it was called...

Filler hose...
"1 3/4" BELLOWFLEX FUEL FILL HOSE" part # 57910-175 - 24" at .64 per inch did the job with enough extra for the body lift.

Vent hose was...
"3/4" FLEX-LOCK HOSE # 250" - 6' at 1.90 per foot.

Arizona Hose and Rubber Co.
2945 N. Flowing Wells Rd.
Tucson, AZ 85705
PH: 520-623-0531
FAX: 520-623-0533

Date was 12/21/01 - Didn't get salespersons name. She measured mine and had it cut and me out of there in like 3 minutes. $30 and never had a problem since.