M715 lift using chevy springs

[TOM 82 WOODY]

Did anybody lifted there 715 using 3/4 ton chevy springs and fabricating the spring hangers and shackles underneath the frame? If there's one how much is the lift of the springs in the front and the back if this going to be spring over conversion. I'm planning to use Dana60/14 bolt combo.I'll be putting 40 or 42 inches tires.Thank you for any input.TOM.

[Brad W.]

it won't take much to clear 42" tires. do a spring over axle conversion on the front, and a block/shackle on the back. just level the back with the front. the M-715 has big enough fenders that you wont need much lift to fit those huge tires.