blt2krl, fuel cell question

[Berrett]

i am about to get a cell similar to the one you have, how did you plumb it? did you just run a vent-line to the outside or use it as a return line and just use the cap vent? does yours have the corner pickup (circle track tank). how is that on side hills? just trying to get everything figured out before i start throwing out money

[ March 30, 2004, 10:14 AM: Message edited by: Berrett ]

[blt2krl]

I plumbed it with a return line. It has the corner pickup and I have had zero problems with it on steep side angles. It only takes five minutes tops to plumb it in. I can take some pics if ya want.

[Berrett]

pics would be great. so you just used the two fittings for send and return lines and the cap as the vent right? thats what i was thinking of doing

[full_hydro]

bling bling

[blt2krl]

Originally posted by Berrett:
pics would be great. so you just used the two fittings for send and return lines and the cap as the vent right? thats what i was thinking of doingthat is what I did. The cap is a vent that closes if the rig is rolled.

[Berrett]

Originally posted by full_hydro:
bling blingyou know it, i figure i might as well, niether of my tanks will fit so i would need something else anyways. but i am still looking into other options as well

[ March 30, 2004, 02:07 PM: Message edited by: Berrett ]

[Berrett]

[/QUOTE]that is what I did. The cap is a vent that closes if the rig is rolled.[/QB][/QUOTE]
okay, thats what i thought, never mind the pics then. thanks

[blt2krl]

Sorry man your going to see them... :D
http://steepndeep.dats.com/images/gallery/MISC/IM000914.JPG
http://steepndeep.dats.com/images/gallery/MISC/IM000915.JPG

[Berrett]

thanks for forcing those pics on me ;) whats up with the sag in the middle? did the sun/heat do that?

[Zac]

if I put that same setup inside my wagoneer (that doesnt have any openings) would it always
smell like gas?

[blt2krl]

Originally posted by Berrett:
thanks for forcing those pics on me ;) whats up with the sag in the middle? did the sun/heat do that?Nope, The plastic fuel cells tend to due that due to the material not being super rigid. Thats all the sag the fuel cell will get. The supper bling aluminum tanks are what all the POR guys run because the don't like the sag. It doesn't bother me cause I have a budget.

[blt2krl]

Originally posted by Zac:
if I put that same setup inside my wagoneer (that doesnt have any openings) would it always
smell like gas?I would say yes. Do to the fact your vent would be inside.